®
COOPER LIGHTING - METALUX
DIMENSIONS
DESCRIPTION
The WS Series is a specification
wraparound luminaire featuring
energy efficient performance.
The luminaire’s characteristic
clean, low profile design is both
appealing and practically
functional. The WS Series
utilizes a clear, low brightness,
extruded acrylic refractor with
injection molded end caps for
high performance and good
looks. The efficient and stylish
WS Series is the perfect
LAMPS
2 Lamp
3/4 Lamp
A
B
C
D
9-7/8" (251mm)
15-3/8" (391mm)
2-5/8" (67mm)
2-5/8" (67mm)
8-1/4" (210mm)
13-3/4" (349mm)
7-1/4" (184mm)
12-3/4" (324mm)
WS SERIES
wraparound for commercial
spaces, schools, dormitories,
offices and retail areas.
2', 4' or 8' Surface
2, 3 or 4 Lamps
SURFACE WRAPAROUND
SPECIFICATION GRADE
ORDERING INFORMATION
SAMPLE NUMBER: WS-232A-120V-EB81-U
• Equipped with energy
saving ballasts/complies
with federal energy
STarting Type
Packaging
U=Unit Pack
Options
(See Options
Section)
Tandem
Blank=4' Length
8T=8' Length
efficiency standards
LTS=Low Trigger
Start (20 Watt only)
(120V only)
HTS=High Trigger
Start (20 Watt only)
Ballast Type (1)
Blank=Standard Magnetic Ballast
(20W only)
• Low profile
WS=Series
LE3=T12 Magnetic Energy Saving
EB8 = T8 Electronic Instant Start.
• Low brightness/extruded
acrylic refractor
Width
Voltage (1)
Total Harmonic Distortion < 10%
Blank=Standard
A=Wide Body for
2 Lamps
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal Voltage
120-277(2)
No. of Ballast
1, 2 or 3
• Injection molded end
plates
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
Harmonic Distortion < 20%
Number of Lamps
2, 3 or 4 lamps
(Not Included)
No. of
Ballast
1, 2 or 3
• Baked white enamel finish
Options
ER8 = T8 Electronic Program Rapid Start.
GL=Single Element Fuse
GM=Double Element Fuse
Emergency - for EM installed,
see EM options table(6)
• Lift and shift refractor for
ease of re-lamping
Wattage (Length)
20=20W T12 (24")
17=17W T8 (24")
40=40W T12 (48")
32=32W T8 (48")
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB2 =T12 Electronic Rapid Start.
• Surface or stem mounting,
single or continuous
No. of Ballast
1 or 2
(3) (4) (5)
row
(For complete details on generic or to specify
manufacturer’s ballast see pg. 469)
Lens
A=Acrylic Refractor/Lens
• Also available in tandem 8'
lengths
• UL/CUL Listed. Suitable for
damp locations.
(1)
(2)
NOTES: Products also available in non-US voltages and frequencies for international markets. Not available when specifying emergencies, voltage must be specific.
(3)
(4)
(5)
Stem mounting not available on 3-lamp fixtures. 2 point suspension recommended for 2 and 4-lamp fixtures. Steel endplates with 7/8" KO standard for continuous
row mounting. Non available for 2' version.
(6)
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
COOPER LIGHTING
421
|