G2579
Instructions
TELESCOPE & PROJECTOR
Please keep this instruction sheet for future reference,
as it contains important information.
Requires four “C” (LR14) alkaline batteries
for operation (not included).
Requires one KPR113 Krypton light bulb (included).
Tool required for battery installation and light bulb replacement:
Phillips screwdriver (not included).
.
Assembly
Hole
Threaded Bar
Plastic Screw
Tripod
• Place the projector/telescope upside-down on a flat surface.
• Position the tripod with the rib side facing down.
• Insert the tripod into the center slot on the projector/telescope.
• Align the holes in the projector/telescope with the hole in the tripod.
• Push the threaded bar through the holes in the projector/telescope
and the tripod.
• Place the plastic screw on the end of the threaded bar and tighten.
Do not over-tighten.
3
Using the Telescope
WARNING
Never point the telescope at or near the sun. Viewing
the sun can cause instant, permanent eye damage.
Cushioned Eyepiece
Telescope
Focus Knob
Angle Adjustment Knob
Tripod
Helpful Hints: This product has been
designed for use with children. We do,
however, recommend that you help
them set up the product for telescope
or projector use and teach them how
®
to use it. Remove ViewMaster reel from
the projector before using the telescope.
• Unfold the tripod into the open position.
• Stand the telescope on its legs on a hard, flat surface.
• Point the telescope at the desired object.
• Tighten the angle adjustment knob. Do not over-tighten.
• Look through the eyepiece.
• Turn the telescope focus knob to get a sharper image.
4
Telescope Tips
STOP S
Image Viewed
Actual Image
Through Telescope
• This telescope has a magnification power of 17.5X. This means that
objects seen through the telescope look 17.5 times larger than with the
eyes alone.
• This telescope is a refracting telescope. When you look at an object
with this telescope, the object will appear backwards. For example, if
you look at a STOP sign, you will see the word backwards (refer to the
picture above).
• It’s easier to find objects when you move the telescope up and down
because up is still up, and down is still down. They are not reversed.
• Practice moving the telescope slowly from side to side until you can
easily focus on an object.
Looking through your Telescope
There are many exciting things to discover with your telescope.
Remember, never look at the sun or any other bright light
with your telescope, because that can cause permanent, instant
eye damage. The best time to use your telescope is when the sun is
behind you.
• Point your telescope at the top of a tall tree. Can you see the leaves?
Does the bark look smooth or rough? Can you find a bird’s nest? Is
there a squirrel in the tree, or a bird on a branch?
• Point your telescope at a tall building or the rooftop of a house.
Can you see if the building is made of stones, bricks, wood or metal?
Is there a chimney? What color are the bricks?
• Point your telescope at a garden. Can you focus on one flower?
Do you see any birds, animals or insects? What else can you find
in the garden? You may be able to watch birds perched on wires,
pulling worms from the grass, or splashing in a birdfeeder. How
many different birds can you see?
5
Using the Projector
Slot
Advance
Lever
Reel Storage
Compartment
Projector
Focus Knob
On/Off Switch
Tripod
On/Off Switch
You can use the projector to send bright, clear images from any
View-Master® reel onto walls, ceilings or just about anywhere.
• Unfold the tripod into the open position.
• Stand the projector on its legs on a hard, flat surface.
• Point the projector at the desired viewing area.
• Tighten the angle adjustment knob. Do not over-tighten.
• To turn the projector on: Slide the on/off switch forward.
• To turn the projector off: Slide the on/off switch backward.
• To insert the reel:
Reel
Fit the reel into the slot
with the printed side to
the rear and push all
the way down.
Slot
• To remove the reel:
Pull the reel straight up.
Helpful Hint: Remove
the reel before using the
telescope.
6
Advance
Lever
Projector
Focus Knob
Advance
Lever
• To focus the image: Adjust the
projector focus knob until the
image is clear.
• To see the next picture: Press
the advance lever.
Projector
Focus Knob
Helpful Hint: Since you cannot rewind to a favorite picture,
continue to press the advance lever to find a desired picture.
Projector Tips
• For the steadiest picture show, place the projector on a hard, flat
surface.
• Make sure the play area is completely dark for maximum
picture clarity.
• To turn the projector into a telescope, simply remove the reel and
turn the projector off.
7
Storage
Reels
Reel Storage
Compartment
®
• Store ViewMaster reels in the reel storage compartment.
• Loosen the angle adjustment
knob.
• Fold the tripod legs up.
Carrying
Handle
• Tighten the angle adjustment
knob to lock tripod legs in
place. Do not over-tighten.
Tripod
• Carry this product using the
convenient carrying handle.
8
Light Bulb (Glass Bulb) Replacement
IMPORTANT! Should the light bulb become non-functional, you are
advised to remove or replace it. This should be carried out away from the
child’s play area.
Notch
Light Bulb
1
Keyhole
Tab
Compartment
Door
Screw
• Using a Phillips screw-
driver, turn the keyhole
clockwise.
Note: Make sure the tab
aligns with the notch.
• Loosen the screw on the
light bulb compartment
door with a Phillips screw-
driver.
• Lift the light bulb compart-
ment door to open.
Reel Storage
Compartment
Light Bulb
• Loosen the screw on the
light bulb holder with a
Phillips screwdriver. (The
screw will remain in the
light bulb holder.)
• Pull the light bulb holder
straight up to remove.
2
Light Bulb
Holder
Light Bulb
Compartment
Light Bulb
Holder
• Pull to remove the light bulb
from the light bulb holder.
• Discard the light bulb
properly. Beware of
cracked or broken glass.
• Insert a new KPR113
Krypton bulb.
• Replace the light bulb
holder in the light bulb
compartment. Tighten the
screw with a Phillips screw-
driver. Do not over-tighten.
Light Bulb
Screw
9
• Close the light bulb compart-
ment door and tighten the
screw with a Phillips screw-
driver. Do not over-tighten.
3
Keyhole
• Using a Phillips screwdriver,
turn the keyhole counter-
clockwise.
• Turn the projector on
without a reel in place.
• Using a Phillips screwdriver,
turn the keyhole clockwise
and counter-clockwise to
adjust the bulb brightness.
Helpful Hint: Point the projector at a white wall or surface to help
determine bulb brightness. Continue turning the keyhole until you have
the brightest light with minimum dark spots.
Care
• Wipe the outside of this toy with a clean cloth dampened with a mild
soap and water solution. Do not immerse this toy.
• Clean the lenses with soft, damp tissue or damp cotton cloth. Do not rub
or wipe the lenses with a dry cloth because that will cause scratches.
• Keep the lenses clean and dry. Do not touch them with your fingers
because that will eventually damage the lenses.
Consumer Information
®
Question? We’d like to hear from you! Call Fisher-Price
Consumer Relations, toll-free at 1-800-432-KIDS (5437),
8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers
using TTY/TDD equipment, please call 1-800-382-7470. Or, write to:
Fisher-Price Consumer Affairs, 636 Girard Avenue, East Aurora,
New York 14052, U.S.A.
For countries outside the United States:
CANADA Questions? 1-800-567-7724. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga,
Ontario L5R 3W2.
GREAT BRITAIN Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.
AUSTRALIA Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121
Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City,
Tsimshatsui, HK, China.
©Disney/Pixar.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2004 Mattel, Inc. All Rights Reserved. View-Master and View-Master logo are
U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA
G2579pr-0920
|