EM-NH500
Standard Electromagnetic Lock
Special Mounting Plate design
Cable
Fasten the mounting plate on
t h e s i t e t h e n i n s t a l l
electromagnet lock with
power lead cable through
mounting plate slot hole.
Patent:
For assembling the mounting
plate and the electromagnet
lock into the groove, please
make the mark on the
mounting plate and the mark
on the electromagnet lock
itself to be a straight line for
alignment. Either aligning
from left side or from right
side is feasible.
ZL 2006 2 0122522.X
Nr. 20 2006 012 052.1
M308308
GB 06 1 6099.8
06 07229 (France)
Features
Offers up to 1200 LBS Holding Force.
Anodized aluminum housing.
Groove template & housing for easy installation.
Dual voltage 12 or 24 VDC (selectable).
Anti-Residual magnetism designed.
Slide the electromagnetic
lock to fit with the mounting
plate as the drawing. Once
t h e c o r r e c t p o s i t i o n i s
encountered, use the Allen
Wrench to fasten the fixing
screws through the bottom of
the electromagnet lock into
the mounting plate.
Complete mounting hardware included.
Statement
The NH series electromagnet lock is an important mounting
plate design breakthrough. The mounting plate is designed
with
a
well engineered sliding mechanism that makes
electromagnet considerably easy to clasp the mounting plate
to allow security of use and maximize the ease of installation.
Therefore, even if used for longer periods, the tricky
innovation in its design will prevent the electromagnet of
being falling when the screw are loosening up .
The EM-NH500 Series are high quality and safety range of
standard fail-safe electromagnetic locks that is simply, works
well in order to effectively secure with doors. It is surface
mounted face to face locks offering up to 1200 pounds holding
force which this lock is recommended for applications which
require higher levels of access and egress control and is
suitable for fire doors and emergency exit doors.
After the electromagnet
firmly assembled with the
mounting plate, use the
screws to fasten the lock on
the site permanently.
Specifications
Voltage Tolerance: 15%
Patent
ZL 2006 2 0122522.X (China)
Nr. 20 2006 012 052.1(Germany)
M308308 (Taiwan)
GB 06 1 6099.8 (Great Britain)
06 07229 (France)
Current Draw: 500mA@12Vdc;250mA@24Vdc
(at 20 degree centigrade)
Operating Temperature from -10 to 55 degree
centigrade
Humidity: 0~95% non-condensing.
Holding Force: Up to 1200 lbs (545 Kg)
Dimensions:
Magnet:(L) 267, (W) 71, (D) 40 mm
Armature Plate:(L) 185, (W) 62, (D) 16 mm
Mounting Plate:(L) 267, (W) 40, (D) 8 mm
Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight (Approx.): 4.8 Kg
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of
5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001
&
QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-EM-NH500 Ver. D Published on 2008.08.18
|